Banner_DigitalMotorController Banner_IMM100_Series Banner_IMC100Series Banner_IRMCSeries Banner_iMotionApplicationKit

+ Reply to Thread
Results 1 to 1 of 1

Thread: IRMCK311 Custom Programming Methods

  1. #1
    New Member New Member is on a distinguished road
    Join Date
    Dec 2017

    IRMCK311 Custom Programming Methods

    Dear Support,
    IRMCK311 Custom Programming Methods by JTAG, Can you give me some detailed information.
    For example: Hardware design, Operation Flow, Precautions etc. Thanks

    The following procedure,I try it to read the chip,but witch I get is 0x00,0x10,0x20,0x30,0x40......0xF0,Rather than blank value. were am I wrong? pls help me. thanks~

    Write 0xF5 to IR - Enter test mode
    Write 0x70 to IR then 0x0002 to DR - Set TCK to main system clock
    Write 0x50 to IR then 0x00 to DR - Set OTP_Setup to 0x00
    Write 0x51 to IR then 0xFFFF to DR - Set OTP_Address to 0xFFFF (disable read protection)
    Write 0x72 to IR
    Read DR - Dummy read
    Write 0x51 to IR then 0x0000 to DR - Set OTP_Address to 0x0000
    Write 0x72 to IR - Enable auto-increment OTP read
    Read DR - Dummy read
    Read DR - Read OTP address 0x0000
    Read DR - Read OTP address 0x0000

    Write 0xF6 to IR - Exit test mode
    Last edited by; Dec 7th, 2017 at 02:37 AM.

+ Reply to Thread

Tags for this Thread


All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.