IRMCK311 Custom Programming Methods

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Dear Support,
IRMCK311 Custom Programming Methods by JTAG, Can you give me some detailed information.
For example: Hardware design, Operation Flow, Precautions etc. Thanks

The following procedure,I try it to read the chip,but witch I get is 0x00,0x10,0x20,0x30,0x40......0xF0,Rather than blank value. were am I wrong? pls help me. thanks~

Write 0xF5 to IR - Enter test mode
Write 0x70 to IR then 0x0002 to DR - Set TCK to main system clock
Write 0x50 to IR then 0x00 to DR - Set OTP_Setup to 0x00
Write 0x51 to IR then 0xFFFF to DR - Set OTP_Address to 0xFFFF (disable read protection)
Write 0x72 to IR
Read DR - Dummy read
Write 0x51 to IR then 0x0000 to DR - Set OTP_Address to 0x0000
Write 0x72 to IR - Enable auto-increment OTP read
Read DR - Dummy read
Read DR - Read OTP address 0x0000
Read DR - Read OTP address 0x0000

Write 0xF6 to IR - Exit test mode
0 Likes
1 Reply
snget2
Moderator
Moderator
Moderator
5 sign-ins First like received 25 replies posted

Thank you, for using our controller IMCK311. this product are obsolete, we are not supporting it anymore.

We are recommending to you our new iMOTION 2.0 with IMC302, for your new design.

0 Likes