+ Reply to Thread
Results 1 to 2 of 2

Thread: XMC1100 - can not add a second uart

  1. #1
    New Member New Member WS123 is on a distinguished road
    Join Date
    Nov 2016
    Posts
    1
    Points
    15

    XMC1100 - can not add a second uart

    Hi,
    i use XMC1100-T038X0064.
    the first uart works perfect, Standard pins used: P1.2 and P1.3
    now i would like to setup a second UART on Pins P1.0 and P1.1. Up to this moment they are free, not used by something else.
    when i try to add a new APP, Communication, General Purpose, UART, Dave (V4.3.2) is not able to grant my last resources request.
    what might go wrong? Who has an idea? Thanks in advance!

  2. #2
    Beginner Beginner
    Infineon Employee
    Infineon Employee
    Andi_H is on a distinguished road
    Join Date
    Dec 2014
    Location
    Deutschland
    Posts
    45
    Points
    60.17578125
    Hy WS123,

    did you use the "Pin Out Tool" ? It is good for the PIN allocation before start with Dave...

    https://www.infineon.com/cms/de/prod...rtex-m/#!tools

    I have tested with a blank dave project and only this 2 UART Apps without problems... it looks like that any other app cause the problem!?

    which apps do you use?

    best regards
    Andi
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.