infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: XMC1400 triggered multiple analog-to-digital conversion (vadc)

  1. #1
    New Member New Member norgmis is on a distinguished road
    Join Date
    May 2017

    XMC1400 triggered multiple analog-to-digital conversion (vadc)

    I want to start the ADC by a timer. It works just as well. The ADC should then perform 3,5 or 7 conversions. Then an interrupt is to be triggered.
    I am currently using ADC_SCAN_APP with 3 channels.
    I get the results with the following commands:
    val[0] = ADC_MEASUREMENT_ADV_GetResult(&ADC_MEASUREMENT_ADV _Channel_A_handle);
    val[1] = ADC_MEASUREMENT_ADV_GetResult(&ADC_MEASUREMENT_ADV _Channel_B_handle);
    val[2] = ADC_MEASUREMENT_ADV_GetResult(&ADC_MEASUREMENT_ADV _Channel_C_handle);
    Channels A, B and C are all connected to the same analog port.
    But how can I increase the number of conversions?
    What settings do I have to make in the ADC_QEUE_APP?

    Thank you very much!


  2. #2
    New Member New Member HimanshuRai is on a distinguished road
    Join Date
    Jun 2019
    Will you please share the algorithm ?

+ Reply to Thread

Tags for this Thread


All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.