Attachments are accessible only for community members.
Not applicable
Nov 01, 2017
07:30 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 01, 2017
07:30 AM
I am trying to set up a simple FIR filter on ADC on an XMC4400.
Every time I click FIR filter in post processing on ADC_MEASUREMENT_ADV, I get an
"DAVE is not able to grant your last hardware resource request".
I have selected the ADC_SCAN_APP at 8 bit conversion mode in DAVE 4.3.2
Only upto 4 FIFO configurations are generated. Anything beyond that gives the above error.
Also other than subtract and accumulate, selecting any of the filtering coefficients brings the above error
Every time I click FIR filter in post processing on ADC_MEASUREMENT_ADV, I get an
"DAVE is not able to grant your last hardware resource request".
I have selected the ADC_SCAN_APP at 8 bit conversion mode in DAVE 4.3.2
Only upto 4 FIFO configurations are generated. Anything beyond that gives the above error.
Also other than subtract and accumulate, selecting any of the filtering coefficients brings the above error
1 Reply
Nov 03, 2017
03:52 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 03, 2017
03:52 AM
Hi,
DAVE is right. In the XMC4400 the boundary flags are associated only with the first 4 result registers (see bottom of page 17-33 in XMC4400 reference manual) .
Therefore if you enable the boundary flag, you can only have a FIFO size of upmost 4 registers.
Regarding the post processing options, only the result register 7 and 15 allows result filtering (see page 17-40 in XMC4400 reference manual).
More details can be found in the AP32305 - XMC4000 - Versatile Analog to Digital Converter(VADC)
Regards,
Jesus
DAVE is right. In the XMC4400 the boundary flags are associated only with the first 4 result registers (see bottom of page 17-33 in XMC4400 reference manual) .
Therefore if you enable the boundary flag, you can only have a FIFO size of upmost 4 registers.
Regarding the post processing options, only the result register 7 and 15 allows result filtering (see page 17-40 in XMC4400 reference manual).
More details can be found in the AP32305 - XMC4000 - Versatile Analog to Digital Converter(VADC)
Regards,
Jesus