Banner_Gate_Driver Banner_Isolated_GateDriver Banner_SOI_Gate_Driver Banner_Low_Side_Gate_Driver Banner_Solutions_for_Gate_Driver_and_power_switches

infineon4engi@twitter twitter

infineon4engineers Facebook

infineon@linkedin linkedin

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    New Member New Member johndsd is on a distinguished road
    Join Date
    Oct 2017

    Is the TLE7182E gate driver compatible with the AUIRF7739L2TR DirectFET ?

    I plan to use the TLE7182E gate driver to drive a full H-bridge using AUIRF7739L2TR DirectFETs.

    The supply voltage will be 13.8V and the switching frequency will be 25kHz.

    Will this gate driver be able to drive these DirectFETs ?

    I have been reading various application notes to determine the power requirements for a gate driver but its confusing.

    Things I am unsure of are:

    1 - What is the voltage of the TLE7182E gate driver outputs ? Will this be the supply voltage i.e. 13.8V ?
    2 - The AUIRF7739L2TR data sheet has two values for Gate-to-Source charge, Qgs1 (46nC) and Qgs2 (19nC). Whats the difference and which value should I use ?
    3 - What is the maximum output current of the TLE7182E gate driver outputs, I cannot seem to find this value in the datasheet ?

  2. #2
    Administrator Huixian is on a distinguished road
    Join Date
    Apr 2017
    You could use TLE7182E to drive AUIRF7739L2TR DirectFET.
    The output volage of TLE7182E gate driver should be almost the same or a Little bit less than the supply voltage. (VS - I * Rdson)
    As can be seen in the data sheet page8 there are 2 sources. You should use the sum of these 2 values Qgs=Qgs1+Qgs2.
    The maximum ouput current is not given in the data sheet, however it should not be more than the supply current, which states in data sheet page8 45mA.


All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.