infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 3 of 3

Thread: Ir2110

  1. #1
    New Member New Member bmakovecki is on a distinguished road
    Join Date
    Sep 2017



    I'm trying to figure out how can I use IR2110 in my projects. I have couple of questions:

    - Are R6,R8 mandatory? It doesn't seems to work properly at low freequency. I expect that when HIN is ON for 100ms, that vgate1 should stay ON for 100ms (time depends on bootstrap cap). But when using 1K R6,R8 gate stays opened for short time as it is drained away very quickly.
    - When there is no load, high side MOSFET source is charged from VS and vgate1 compensate so that MOSFET VGS stayes at 0V. Is this expected behavior? If so, I do not like that VCC is leaking into high voltage circuit (bridge). Is there a way to prevent this? I would expect that when IR2110 powers ON and no load is present (all gates in bridge is closed) that all gates should be at 0V and no voltage is present on VOUT1.

    Click image for larger version

Name:	ir2110.PNG
Views:	2
Size:	36.6 KB
ID:	3105

    Boris Makovecki

  2. #2
    Beginner Beginner zuhaib is on a distinguished road
    Join Date
    May 2017
    you should use an inductor for low frequency switching

  3. #3

    Infineon Employee
    Infineon Employee
    tengD is on a distinguished road
    Join Date
    May 2017
    1. It is not always necessary to use R6, R8, in this application, you may delete them.
    2. if the HIN/LIN is kept low, then the HO/LO (Vgs) will keep at 0V.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.