Sep 08, 2017
12:53 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 08, 2017
12:53 PM
Hi everybody,
I will read the AD-data from ADS131A04 like this> see the page 36 of datasheet. texasInstruments
it should be 16+4*24 bits, what is 112 pulses of SCLK. SCLK should be very quick / min 25 MHz
.
But the CS/ signal have to be only during reading obligatory Low. / without the moving to Hi, what is the effect of use two frames....
I did not find similary application
zbyno
I will read the AD-data from ADS131A04 like this> see the page 36 of datasheet. texasInstruments
it should be 16+4*24 bits, what is 112 pulses of SCLK. SCLK should be very quick / min 25 MHz
.
But the CS/ signal have to be only during reading obligatory Low. / without the moving to Hi, what is the effect of use two frames....
I did not find similary application
zbyno
0 Replies