infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: SPI based micro SD Card interface

  1. #1
    New Member New Member naveen.reddy is on a distinguished road
    Join Date
    May 2016

    SPI based micro SD Card interface


    working on SD card example below
    with different IO pins for SPI Interface of Micro SD card with XMC4700
    unable to write data on micro SD Card.
    the I/o are:
    P6_4 -- MOSI
    P6_3 -- MISO
    P6_4 -- CLK
    P6_4 -- Chip Select.

    Naveen Reddy
    Senior Firmware Engineer
    Navsemi Energy

  2. #2
    Beginner Beginner Luca75 is on a distinguished road
    Join Date
    Sep 2019
    Hi, we've the same problem. Do you have found a solution to your problem?

    Thanks, kind regards.


+ Reply to Thread

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.