Not applicable
Jun 22, 2017
06:14 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2017
06:14 AM
Hi there,
We would like to build an automated testing setup for our xmc4700. To do that we want to flash the firmware from a raspberry pi 3 via an xmc-link (v1.1) to an xmc4700.
What we did:
- Downloaded and installed Segger tool for ARM from here (https://www.segger.com/downloads/jlink/. )
- Added the install location of the segger tools to the PATH variable in the .bashrc file.
- When we connected the Jlink via USB and started the JlinkExe we got the following error:
"
pi@raspberrypi:~ $ JLinkExe
SEGGER J-Link Commander V6.16c (Compiled Jun 16 2017 18:19:34)
DLL version V6.16c, compiled Jun 16 2017 18:19:11
Connecting to J-Link via USB...FAILED: Cannot connect to J-Link via USB.
J-Link>
"
When we tried it from a windows pc it works fine.
Furthermore the DEBUG-LED at the xmc-link is constantly iluminated green and the COM-LED constantly red.
When we tried form the Windows PC the DEBUG-LED is also constantly green and the COM-LED off.
Has anyone ever tried to flash firmware from the raspberry pi to the xmc? Are there maybe other options than the xmc-link?
Thanks for your help!
Nicolas
We would like to build an automated testing setup for our xmc4700. To do that we want to flash the firmware from a raspberry pi 3 via an xmc-link (v1.1) to an xmc4700.
What we did:
- Downloaded and installed Segger tool for ARM from here (https://www.segger.com/downloads/jlink/. )
- Added the install location of the segger tools to the PATH variable in the .bashrc file.
- When we connected the Jlink via USB and started the JlinkExe we got the following error:
"
pi@raspberrypi:~ $ JLinkExe
SEGGER J-Link Commander V6.16c (Compiled Jun 16 2017 18:19:34)
DLL version V6.16c, compiled Jun 16 2017 18:19:11
Connecting to J-Link via USB...FAILED: Cannot connect to J-Link via USB.
J-Link>
"
When we tried it from a windows pc it works fine.
Furthermore the DEBUG-LED at the xmc-link is constantly iluminated green and the COM-LED constantly red.
When we tried form the Windows PC the DEBUG-LED is also constantly green and the COM-LED off.
Has anyone ever tried to flash firmware from the raspberry pi to the xmc? Are there maybe other options than the xmc-link?
Thanks for your help!
Nicolas
1 Reply
Not applicable
Jun 22, 2017
08:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 22, 2017
08:03 AM
Solved!
by executing "sudo ./JLinkExe" in the JLink folder it worked
by executing "sudo ./JLinkExe" in the JLink folder it worked