May 31, 2017
06:37 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 31, 2017
06:37 PM
Hi,
I trying to USB Function with our customer using XMC4800.
we want to communicate from PC to XMC4800 by USBD_BULK mode. because they need to high speed communication .
I know that infinion example web site as a below.
https://www.infineon.com/cms/en/product/promopages/aim-mc/dave_downloads.html
but, There is no Bulk mode example project.
Do you have USB bulk mode example project to assist our project?
I trying to USB Function with our customer using XMC4800.
we want to communicate from PC to XMC4800 by USBD_BULK mode. because they need to high speed communication .
I know that infinion example web site as a below.
https://www.infineon.com/cms/en/product/promopages/aim-mc/dave_downloads.html
but, There is no Bulk mode example project.
Do you have USB bulk mode example project to assist our project?
- Tags:
- IFX
2 Replies
Not applicable
Jun 09, 2017
09:14 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 09, 2017
09:14 AM
In the absence of other answers, take a look at this project - https://github.com/micropython/micropython-infineon/tree/master/xmc. It's not exactly reusable, but it gives a good start with implementing USB drivers on XMC4x00s.
I was not able to find any example code for Infineon micros anywhere unfortunately.
Hope that helps,
Andrey
I was not able to find any example code for Infineon micros anywhere unfortunately.
Hope that helps,
Andrey
Jan 11, 2018
03:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 11, 2018
03:03 AM
Dear All,
I am working on USB Device driver development. I need transmit some data from the device to USB host.
I got following example "USBD_VCOM_APP_Example_XMC45". However it is an APP based project.
Kindly share some example codes which are not App based.
Thank you In anticipation
A
I am working on USB Device driver development. I need transmit some data from the device to USB host.
I got following example "USBD_VCOM_APP_Example_XMC45". However it is an APP based project.
Kindly share some example codes which are not App based.
Thank you In anticipation
A