Attachments are accessible only for community members.
Not applicable
May 16, 2017
11:28 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 16, 2017
11:28 PM
Hi,
I would like to produce the following pulse sequence:
_|_|_|____|_|_|____|_|_|____...|_|_|____________________________|_|_|____|_|_|____
tp = 2µs
t1 = 50µs
t2 = 370µs
t3 = 2000µs
After each pulse the ADC should store several conversions in an array.
Thanks to AP32287, I was able to generate the pulses successfully.
Also the conversions I could make thanks to the AP32287.
http://www.infineon.com/dgdl/Infineon-CCU4-XMC1000_XMC4000-AP32287-AN-v01_01-EN.pdf?fileId=5546d4624...
Both together were not possible.
It failed, in my opinion, that I can not move any function into another slice.
What can I do?
Is my approach the right one?
Are there better solutions?
I would like to use the XMC library and not the DAVE apps.
I changed:
#define SYNC_SLICE CCU40_CC40 -> CCU40_CC41
#define SYNC_SLICE_NR (0U) -> (1U)
#define SLICE0_PTR CCU40_CC40 -> CCU40_CC41
#define SLICE0_NUMBER (0U) -> (1U)
Both times worked nothing more
I would like to produce the following pulse sequence:
_|_|_|____|_|_|____|_|_|____...|_|_|____________________________|_|_|____|_|_|____
tp = 2µs
t1 = 50µs
t2 = 370µs
t3 = 2000µs
After each pulse the ADC should store several conversions in an array.
Thanks to AP32287, I was able to generate the pulses successfully.
Also the conversions I could make thanks to the AP32287.
http://www.infineon.com/dgdl/Infineon-CCU4-XMC1000_XMC4000-AP32287-AN-v01_01-EN.pdf?fileId=5546d4624...
Both together were not possible.
It failed, in my opinion, that I can not move any function into another slice.
What can I do?
Is my approach the right one?
Are there better solutions?
I would like to use the XMC library and not the DAVE apps.
I changed:
#define SYNC_SLICE CCU40_CC40 -> CCU40_CC41
#define SYNC_SLICE_NR (0U) -> (1U)
#define SLICE0_PTR CCU40_CC40 -> CCU40_CC41
#define SLICE0_NUMBER (0U) -> (1U)
Both times worked nothing more
0 Replies