[SOLVED] Debugger for TLE9879

Announcements

Webinar: Integrated solutions for smaller, simpler low-voltage motor control design.
Join the webinar to experience!

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Hi,

I was using the JLINK debugger for Debugging and flashing in the TLE987x board. Now, the debugger is not working. Is there any alternate debugger that can be used instead of JLINK.

It is little urgent scenario. Please help out soon.
0 Likes
2 Replies
cwunder
Employee
Employee
5 likes given 50 likes received 50 solutions authored
You should be able to google for a CMSIS-DAP Debugger and use this. If you are using Keil then you can change from JLINK to CMSIS-DAP Debugger in the debug dialog. Generally you can use any of the other silicon vendors for this cheap solution.
0 Likes
Mc-Key
Employee
Employee
Welcome!
Hi,
here are some additional options.
These SWD Debug interfaces are tested with all Infineon Embedded Power devices.

J-Link Debugger:
https://www.segger.com/products/debug-probes/j-link/

ULink SWD Debug Interfaces:
http://www2.keil.com/mdk5/ulink

Infineon XMC Link:
https://www.infineon.com/cms/de/product/evaluation-boards/kit_xmc_link_segger_v1/

Best Regards,
M.K.
0 Likes