ringing in the gate drive signal

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
I see too much ringing in the gate drive signal of CoolMOSIPA65R190E6. What could be the problem?
0 Likes
1 Solution
Not applicable
Suggest looking at the layout traces between the driver / controller and the MOSFET. Try increasing the series gate resistor value to reduce ringing. Based on the topology used, adding an external capacitor across Drain and Source (usually in pF range) should also help

View solution in original post

0 Likes
1 Reply
Not applicable
Suggest looking at the layout traces between the driver / controller and the MOSFET. Try increasing the series gate resistor value to reduce ringing. Based on the topology used, adding an external capacitor across Drain and Source (usually in pF range) should also help
0 Likes