Sp37

公告

大中华汽车电子生态圈社区并入开发者社区- 更多资讯点击此

Tip / 登入 to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
不适用
Hi,,,,am new to SP37. Can you give any ideas??
0 点赞
8 回复数
User12775
Level 5
Level 5
First solution authored First like received
0 点赞
User9698
Level 3
Level 3
Hi Zongru.
Which compiler must be used for the SP37 sensor?
where can i found registers description document of the SP37 sensor?
thanks.
0 点赞
User12775
Level 5
Level 5
First solution authored First like received
It is a 8051 based chip.
You could use any 8051-compiler.
0 点赞
User12775
Level 5
Level 5
First solution authored First like received
As for the datasheet, I figure you must ask your infineon sales or support for it.

Try contact sensors@infineon.com.

I have the datasheet but I could not share it to you. Because it is not permitted by Infineon.

2775.attach
0 点赞
User9698
Level 3
Level 3
Thank you Zongru.
your help was great.
I use Keil compiler C51 now.
have you paid the cost for the SP37 datasheet?or enough i buy SP37 sensor from infineon?and they give to me datasheet?
thank you.
0 点赞
User12775
Level 5
Level 5
First solution authored First like received
You don't need pay for the datasheet.

You even don't need to buy any chip to get the datasheet.

But you should contact the sales man and tell them your plan.(What product do you want to design? The volume, the development plan, etc.) Then you sign NDA with them and they will give you the datasheet and relevant information.
0 点赞
User9698
Level 3
Level 3
Thank you.
0 点赞
User18967
Level 1
Level 1
It is a Pressure sensor with a range from 100 up to 450kPa
0 点赞