infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 1 of 1

Thread: Tip of the day: Cannot change parameters using C/Probe XMC GUI (iMotion MADK)

  1. #1
    New Member New Member
    Infineon Employee
    Infineon Employee
    Luxun is on a distinguished road
    Join Date
    May 2015

    Tip of the day: Cannot change parameters using C/Probe XMC GUI (iMotion MADK)

    You bought one of the iMotion™ MADK kits based on XMC™ control card.
    You have installed all necessary software and downloaded the firmware successfully.
    Now you have started the C/Probe™ XMC™ GUI correctly. But you cannot change the parameters given in the tab "PMSM_FOC_Parameters" or "Motor Tuning" even you confirm the input with "Enter".

    Tip of the day:
    This problem is caused by the Java cache.
    Please make sure that you have the latest version of Java.
    Then please delete the Java cache (Control Panel >> Java >> General >> Temporary Internet Files - Settings... >> Delete Files...).
    Afterwards please reopen the C/Probe™ XMC™ GUI and you will be able to change the parameters.

    Best regards
    Luxun Liu

    Infineon iMOTION™ MADK support team
    Last edited by Luxun; Jan 11th, 2017 at 12:58 AM.

+ Reply to Thread

All content and materials on this site are provided as is. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.