infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: Questions regarding Infineon BTN8962

  1. #1
    Beginner Beginner kynix is on a distinguished road
    Join Date
    Jul 2016
    Posts
    9
    Points
    102.5

    Questions regarding Infineon BTN8962

    I want to design a BDC driving board with Infineon BTN8962.(Infineon BTN8962 is a half of H-bridge IC)

    As we all know,BDC driving circuit is just like this:

    In this picture,We set a High side MOS(QA) as Open,and set a High side(QC) and a Low side(QB) MOSes as close.We just have to ouput a PWM signal to control the speed of BDC.


    But when I use Infineon BTN8962,I found I cound not do this unless using the INH pin as PWM signal input pin.(But in fact,this pin is sleep mode enable pin.It can close its MOS.)

    Which pin should I set as PWM signal output pin?

  2. #2

    Infineon Employee
    Infineon Employee
    Jing.N is on a distinguished road
    Join Date
    Jun 2018
    Posts
    12
    You are right. In this case , you should set a PWM signal at INH pin. This is the most efficient way to control the speed of you motor.
    If you are using the BTN8962TA as a half bridge (as shown in figure 17 in the datasheet) it would be also possible to use the IN Pin for PMW. But in this case you force the motor to slow down when the LSS is active. So this will be pretty inefficient.

    Please find the datasheet below:
    https://www.infineon.com/dgdl/Infine...3fbe32289b7c17
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.