Not applicable
Nov 08, 2016
04:15 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 08, 2016
04:15 AM
Hallo,
i have some question to the "Angle Revolution Register".
I am already reading the "Angle Value Register" very well and now i want to read the the revolution of my motor. The motor shaft runs with 50 rpm.
Here are my Code example:
void RevolutionOutput(void)
{
unsigned Frame_Counter;
int Num_Revolution;
int miso_data = (spi_read(angleRevolution_command));//& 0x7FFF);
Num_Revolution =0x00FF & miso_data;
Serial.print( "\t\t Aktueller Umlauf: ");
Serial.println(Num_Revolution);
}
My Problem is that the sensor give me every second turn around of my motor an increment.
Is it Important to use the Frame_Counter?
Please can anyone helb me?
Sorry for my bad english iam learing:)
best regards
Vita
i have some question to the "Angle Revolution Register".
I am already reading the "Angle Value Register" very well and now i want to read the the revolution of my motor. The motor shaft runs with 50 rpm.
Here are my Code example:
void RevolutionOutput(void)
{
unsigned Frame_Counter;
int Num_Revolution;
int miso_data = (spi_read(angleRevolution_command));//& 0x7FFF);
Num_Revolution =0x00FF & miso_data;
Serial.print( "\t\t Aktueller Umlauf: ");
Serial.println(Num_Revolution);
}
My Problem is that the sensor give me every second turn around of my motor an increment.
Is it Important to use the Frame_Counter?
Please can anyone helb me?
Sorry for my bad english iam learing:)
best regards
Vita
- Tags:
- IFX
0 Replies