Oct 19th, 2016 12:51 AM
Flash memory use?
presently i am working with XMC4200 so in that there is a 256KB FLASH memory is there,in that flash memory i want to use some memory for stack,and 150 Bytes for NVM to store my parameters
1.Is there is a chance to use the some part of the flash memory of xmc4200 as the NVM.
2.if possible then how we can configure,could you please inform me.
please say the step by step procedure if possible.
embedded software developer.
Tags for this Thread
All content and materials on this site are provided “as is“. Infineon makes no warranties or
representations with regard to this content and these materials of any kind, whether express or
implied, including without limitation, warranties or representations of merchantability, fitness for
a particular purpose, title and non-infringement of any third party intellectual property right. No
license, whether express or implied, is granted by Infineon. Use of the information on this site may
require a license from a third party, or a license from Infineon.
Infineon accepts no liability for the content and materials on this site being accurate, complete or up-
to-date or for the contents of external links. Infineon distances itself expressly from the contents of
the linked pages, over the structure of which Infineon has no control.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings
and use of the content on this site are subject to the Usage Terms of the site; third parties using
this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of
this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements,
improvements and other changes to the content and materials, its products, programs and services
at any time or to move or discontinue any content, products, programs, or services without notice.