Oct 14, 2016
12:15 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Oct 14, 2016
12:15 PM
Dear Friends,
Could someone please give some pointers on how to start building your own customised PCB.
My first question is which pins get 5 V supply and which pins get GND.
Is the AGND and DGND the same and from where do I get this ground? Do I just take it to be the mid point of the
secondary of the input supply transformer.
It would be really helpful if you could get back to me quickly.
Thanks a lot.
Shomik C.
Could someone please give some pointers on how to start building your own customised PCB.
My first question is which pins get 5 V supply and which pins get GND.
Is the AGND and DGND the same and from where do I get this ground? Do I just take it to be the mid point of the
secondary of the input supply transformer.
It would be really helpful if you could get back to me quickly.
Thanks a lot.
Shomik C.
Labels
- Labels:
-
XC800
- Tags:
- IFX
0 Replies