infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: how to clear the buffer full in UART

  1. #1

    how to clear the buffer full in UART

    I am working on XMC1100, While Sending Data Through the Terminal to xmc1100. Data Lost was happening. and the buffer full flag is enabled.
    The UART Cofiguration as below

    baudrate = 921600.
    Rx = pin 1.1
    Tx = pin 1.0
    channel = U0C0

    what might be the issue.

    Thanks and Regards,

  2. #2
    New Member New Member Nirmal is on a distinguished road
    Join Date
    Jun 2018
    I am also having this issue on same device and configuration. I am using both channels.

    Can anyone give solution?


+ Reply to Thread

Tags for this Thread


All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.