Not applicable
Jun 17, 2016
02:53 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 17, 2016
02:53 AM
The XMC1000 Oscillator handling Application Note is available at the Infineon Technologies website:
http://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-ar...
Application Note
About this document
This application note describes the calibration of the frequency of the on-chip oscillator in the XMC1000
microcontroller family. Two methods for calibrating the internal clock are covered: 1) Using an external reference signal, 2) Using the on-chip temperature sensor
http://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-ar...
Application Note
About this document
This application note describes the calibration of the frequency of the on-chip oscillator in the XMC1000
microcontroller family. Two methods for calibrating the internal clock are covered: 1) Using an external reference signal, 2) Using the on-chip temperature sensor
- Tags:
- IFX
0 Replies