XMC4100-F64-128 - flash programming

[#1]

Hello,

I would like to use Infineon DAP miniWiggler V3 and Infineon Memtool for flashing application SW and bootloader to my board with XMC4100-F64-128, I can download there easily a bootloader (I have on board LED which shows me a status of SW and it shows me that bootloader is working),
but after downloading application SW, it is not working. Just bootloader is working.

It is strange, that if I download there this SW with original KEIL programmer and KEIL development SW it works well. Where can be a problem?


Target configuration in Memtool is : "Infineon XMC4100 Hexagon Kit XMC4100 (DAS)"

I can se there "FLASH programmimg prepared but not enabled" ? Does it mean that I can´t use this programmer?


Is it possible to flash bootloader and application SW with DAPminiWiggler and DAve?
In manual for mini Wiggler is written that I have to chose a BMI (ASC BSL or SWD/SPD) for XMC1100-XMC1300, is it also needed for XMC4100-F64-128?

Thank you in advance for your help.

[Rick_Nardone]

Hi,

There are some new tools for programming XMC microcontrollers, and they work really well.

1) XMC-Link Debug Probe: http://www.infineon.com/cms/en/product/productType.html?productType=5546d462501ee6fd015023aeb65733b3

2) XMC Flasher (application used to program .hex image into an XMC target 😞 http://community.infineon.com/communities/dave/Shared%20Documents/XMCFlasher/XMCFlasher-0-0-19.zip


DAVE v4 will also work with the XMC-Link Debug probe.


Best,

Rick