Not applicable
May 24, 2016
12:08 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 24, 2016
12:08 AM
For the part ITS42008-SB-D, if the LS pin is connected to high (Vs, 24V), what would be input turn ON and turn OFF voltages.
In the datasheet it was mentioned with respect to Vst (but what is Vst)
If the Vs = 24V, then are the following threshold levels correct
a. Input turn ON threshold: 13V (min) to 24V (max)
b. Input turn OFF threshold : 0V (min) to 11V (max)
Are the above levels are correct if the Vs = 24V.
Can we apply Vs (24V) directly on the Input pins. Please confirm
In the datasheet it was mentioned with respect to Vst (but what is Vst)
If the Vs = 24V, then are the following threshold levels correct
a. Input turn ON threshold: 13V (min) to 24V (max)
b. Input turn OFF threshold : 0V (min) to 11V (max)
Are the above levels are correct if the Vs = 24V.
Can we apply Vs (24V) directly on the Input pins. Please confirm
0 Replies