XMC1100 with 16 Pins - Wrong BMI Selection - User Mode Debug SWD1 (P1.3 and P1.2)

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User11140
Level 1
Level 1
Hello,

I selected the wrong BMI on a XMC1100 device. I have a 16 Pin microcontroller an selected the User Mode (Debug) SWD1 (SWDIO=P1.3, SWDCLK=P1.2).
But obvisouly this chip has no Port 1 (no PIN 1.2 or 1.3). I changed it with Dave 3.

Is it possible to change this back on SWD0 again or do i need a new chip ?

best regards
0 Likes
1 Reply
chismo
Employee
Employee
First like received
Hello,

I guess there isn't any application code inside the chip that can change the BMI based on an external event?

In this case, I am afraid that you will need a new chip.
I don't think the chip can be connected to the DAVE tool anymore to allow the tool to change the BMI.

Regards,
Min Wei
0 Likes