Not applicable
May 16, 2016
01:30 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 16, 2016
01:30 AM
Missed our webcast on "Getting started with XMC4800 EtherCAT®"?
Watch the on demand version right here.
XMC4800 is the first-ever EtherCAT® node on an ARM® Cortex®-M 32-bit microcontroller with on-chip flash and analog/mixed signal capabilities.
In this webcast you will learn about:
www.infineon.com/ethercat
Watch the on demand version right here.
XMC4800 is the first-ever EtherCAT® node on an ARM® Cortex®-M 32-bit microcontroller with on-chip flash and analog/mixed signal capabilities.
In this webcast you will learn about:
- How to make use of the Beckhoff Slave Stack Tool and also integrate the Slave Stack code into DAVE version 4 project
- Interfacing the TwinCAT with XMC4800 relax kit to control the LEDs or reading the status of the push buttons
www.infineon.com/ethercat
0 Replies