XMC4500 Incremental Encoder Signals

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Hi,

I am new with Infineon's XMC and I am trying to acquire the signals from an incremental encoder, in order to track a motor's shaft position.
I was wondering if there is a good starting point from which to develop this application.
Thanks.
0 Likes
3 Replies
User7282
Level 4
Level 4
Hello,

You have here a example POSIF configured in quadrature mode: https://www.infineonforums.com/threads/3540-XMClib-POSIF-as-Quadrature-encoder-example.
0 Likes
Not applicable
I don't have the setup required to test that example (XMC4400, BLDC motor), but I will examine it in order to try to adjust to my project.
Thank you.
0 Likes
User7282
Level 4
Level 4
You also have here one application note for the POSIF module that may be useful to you: http://www.infineon.com/dgdl/Infineon-POSIF-XMC1000_XMC4000-AP32289-AN-v01_00-EN.pdf?fileId=5546d462...
0 Likes