infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Page 5 of 5 FirstFirst 1 2 3 4 5
Results 41 to 46 of 46

Thread: FAQ for XMC4800 EtherCAT

  1. #41
    Beginner Beginner
    Infineon Employee
    Infineon Employee
    MichaelIFX is on a distinguished road
    Join Date
    Mar 2016
    Posts
    38
    Points
    244.53125
    @Volatile
    Each board alone works without problem?
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  2. #42
    Beginner Beginner xyyeh is on a distinguished road
    Join Date
    Aug 2017
    Posts
    5
    Points
    90
    Hi, I have a question regarding the processing time of the ethercat stack. More specifically, where can I find test results involving the execution time (within a single cycle) of the beckhoff Ethercat stack on xmc4800 and xmc4300 for different levels of optimization?

  3. #43
    Beginner Beginner yangyang_2018 is on a distinguished road
    Join Date
    Mar 2018
    Posts
    7
    Points
    95
    Dear engineers,

    I recently study cia 402 on the xmc4800 which is the motor driver, but I can only find the example of cia 402 of ET1100.
    *** So I want to ask:
    *** 1. Are the examples of cia402 based on ET1100 changed to xmc4800?
    *** 2. I read ETG's CIA402 book, but I still don't understand it. If there are examples, I would like to enlighten me.

    Thank you!

    Any reply will be appreciated!

  4. #44
    New Member New Member liufuchuan is on a distinguished road
    Join Date
    Nov 2018
    Posts
    1
    Points
    20
    i just bought a XMC4800 Relax EtherCAT kit., but i cannot find the .zip files "XMC4800 EtherCAT APP SSC Slave Example" from this link "https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc48_relax_ecat_v1/#ispnTab4", there is only a pdf file?? So where could i find the example code??

  5. #45
    New Member New Member Volatile is on a distinguished road
    Join Date
    Jan 2018
    Location
    Germany
    Posts
    3
    Points
    45
    Hi, short question regarding the Automation Board v2. Been working on it for a few days without a problem but when I connected the ISOFACE output this morning to the power source the error led is constantly turned on. I've erased the chip, flashed it with different codes, changed the power adapter and the wires but nothing. No such error on the input side. Is there a chance this is not a hardware defect? Do you have experienced this problem before? Any advice?
    Last edited by Volatile; Feb 20th, 2019 at 12:36 AM. Reason: corrected typing error. change -> chance.

  6. #46
    New Member New Member pilias is on a distinguished road
    Join Date
    Jan 2019
    Posts
    1
    Points
    40
    Is EtherCAT relaxKIT supports SWV output from the onboard debugger cause I am not able to get it working. I have custom a pcb with the same microcontroller and there is running perfectly with a J-link from segger. So Its suppose to be Identical setup but I cannot get it running in the Relax kit.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.