Attachments are accessible only for community members.
Dec 15, 2015
09:59 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 15, 2015
09:59 PM
Hello all,
The current getting started examples published on the XMC11/12/1300 boot kits' webpage are based on the XMC Lib (LLDs).
But I understand that for some users, it is still preferred to have the some simple examples showing directly the accesses to the peripheral registers.
Hence, I attached the previously available non-LLD / non-APP example codes.
These covers the following peripherals:
- ACMP
- ADC
- CCU4/8
- CORDIC MATH Coprocessor
- ERU
- GPIO
- IIC
- POSIF
- RTC
- SPI
- SysTick
- UART
- WDT
Regards,
Min Wei
The current getting started examples published on the XMC11/12/1300 boot kits' webpage are based on the XMC Lib (LLDs).
But I understand that for some users, it is still preferred to have the some simple examples showing directly the accesses to the peripheral registers.
Hence, I attached the previously available non-LLD / non-APP example codes.
These covers the following peripherals:
- ACMP
- ADC
- CCU4/8
- CORDIC MATH Coprocessor
- ERU
- GPIO
- IIC
- POSIF
- RTC
- SPI
- SysTick
- UART
- WDT
Regards,
Min Wei
Labels
- Labels:
-
Technical Center
- Tags:
- IFX
0 Replies