Hello all,

The current getting started examples published on the XMC11/12/1300 boot kits' webpage are based on the XMC Lib (LLDs).
But I understand that for some users, it is still preferred to have the some simple examples showing directly the accesses to the peripheral registers.
Hence, I attached the previously available non-LLD / non-APP example codes.

XMC1300_SIMPLE_EXAMPLES.ZIP

These covers the following peripherals:
- ACMP
- ADC
- CCU4/8
- CORDIC MATH Coprocessor
- ERU
- GPIO
- IIC
- POSIF
- RTC
- SPI
- SysTick
- UART
- WDT

Regards,
Min Wei