Dec 15, 2015
02:56 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 15, 2015
02:56 AM
Hi Infineon,
Dave 4.1.4 doesn't incremental build C++ files. At each build Dave compiles all files.
To test it create a new DaveCE project (I used nanolib and XMC4500), rename main.c to main.cpp and build. At second build (no changes in source) no compilation should happen. But Dave compiles all files again.
Dave 4.1.2 works fine.
At Dave 4.1.4 there is an additional C++ issue:
after downloading to target and switching to debug view, setting/clearing of breakpoints happens very slow, cursor freezes 1 second and more (Segger JLink_V502l).
Best regards,
Wolfgang
Dave 4.1.4 doesn't incremental build C++ files. At each build Dave compiles all files.
To test it create a new DaveCE project (I used nanolib and XMC4500), rename main.c to main.cpp and build. At second build (no changes in source) no compilation should happen. But Dave compiles all files again.
Dave 4.1.2 works fine.
At Dave 4.1.4 there is an additional C++ issue:
after downloading to target and switching to debug view, setting/clearing of breakpoints happens very slow, cursor freezes 1 second and more (Segger JLink_V502l).
Best regards,
Wolfgang
2 Replies
Dec 17, 2015
01:56 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 17, 2015
01:56 AM
I have the same Problem. Can anybody help us?
Thanks,
HiSH
Thanks,
HiSH
Dec 17, 2015
09:30 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 17, 2015
09:30 AM
Hi,
now I found out, that there is a different behavior of the Eclipse settings when building a C or a C++ project.
When 'clean' is checked at
Project / Properties / C/C++Build at tab 'Behavior',
then only at C++ (not at C) a clean always happens before build, which results in a rebuild of all files.
When creating a new project, 'clean' is default checked, uncheck it at C++ projects.
The slow behavior of the breakpoint set/clear at C++ still exists. After setting a breakpoint, Dave very slowly returns from Debug view to DaveCE wiew. This delay doesn't exist at C.
I have opened a ticket:
http://www.infineonforums.com/support/dave3/index.php?option=com_maqmahelpdesk&Itemid=0&id_workgroup...
Best regards,
Wolfgang
now I found out, that there is a different behavior of the Eclipse settings when building a C or a C++ project.
When 'clean' is checked at
Project / Properties / C/C++Build at tab 'Behavior',
then only at C++ (not at C) a clean always happens before build, which results in a rebuild of all files.
When creating a new project, 'clean' is default checked, uncheck it at C++ projects.
The slow behavior of the breakpoint set/clear at C++ still exists. After setting a breakpoint, Dave very slowly returns from Debug view to DaveCE wiew. This delay doesn't exist at C.
I have opened a ticket:
http://www.infineonforums.com/support/dave3/index.php?option=com_maqmahelpdesk&Itemid=0&id_workgroup...
Best regards,
Wolfgang