Not applicable
Nov 27, 2015
09:00 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 27, 2015
09:00 AM
Hello, yesterday on the SPS IPC Drives in Nürnberg i got an XMC4500 Relax Kit.
So today i started some testing.
My first test was to watch a video tutorial and built the same system.
I decided to start with:
http://3532.2871.m.edge-cdn.net/vsc_2871_3532_1_vid_863478/webcast-on-dave-getting-started-with-vers...
I downloaded Dave4.
I did all the same steps, just one thing has changed,
the PWM_Acknowledge changed to PWM_ClearEvent
When i start my project with the debuger, The LEDs start blinking in 1Hz and 5 Hz, but i can't interact with the buttons.
My thought is, the controller starts the program just one time and after one cycle it stops. The LEDs are still blinking, cause the PWM is set on initialisation.
Someone can help me with that?
Best Regards John
So today i started some testing.
My first test was to watch a video tutorial and built the same system.
I decided to start with:
http://3532.2871.m.edge-cdn.net/vsc_2871_3532_1_vid_863478/webcast-on-dave-getting-started-with-vers...
I downloaded Dave4.
I did all the same steps, just one thing has changed,
the PWM_Acknowledge changed to PWM_ClearEvent
When i start my project with the debuger, The LEDs start blinking in 1Hz and 5 Hz, but i can't interact with the buttons.
My thought is, the controller starts the program just one time and after one cycle it stops. The LEDs are still blinking, cause the PWM is set on initialisation.
Someone can help me with that?
Best Regards John
- Tags:
- IFX
- xmc4500 relax kit
1 Reply
Attachments are accessible only for community members.
Not applicable
Nov 29, 2015
08:33 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 29, 2015
08:33 PM