Not applicable
Sep 15, 2015
11:29 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 15, 2015
11:29 PM
Hello everybody,
I've a little bit trouble with the compare match generated by the CCU8. If the CompareValue raises above 49,2% of the PeriodValue the compare match interrupt is doing strange things. It "jumps" from 49% to around 70% and starts jittering.
When the compare value raises above 70% the compare match interrupt is working correctly again.
Does anyone have noticed a similar issue?
I've observed this behavior in centeraligned mode too.
Thanks for yout help
I've a little bit trouble with the compare match generated by the CCU8. If the CompareValue raises above 49,2% of the PeriodValue the compare match interrupt is doing strange things. It "jumps" from 49% to around 70% and starts jittering.
When the compare value raises above 70% the compare match interrupt is working correctly again.
Does anyone have noticed a similar issue?
I've observed this behavior in centeraligned mode too.
Thanks for yout help
Labels
1 Reply
Sep 16, 2015
11:12 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 16, 2015
11:12 PM
This is quite abnormal. Can you refer to the DAVE4 example found at the below link.
http://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-ar...
http://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-ar...