Not applicable
Jun 29, 2015
08:45 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 29, 2015
08:45 PM
Industrial Automation - Dual FOC Motor Control demo
Have a closer look to our motor control demo showing the capabilities of the XMC4400 device. The XMC4400 is a member of Infineon´s Cortex M4 based microcontrollers. We are showing a setup called "Controller based Motion". A PLC controls several motion axis and the Drive executes the motion commands. This is commonly used in automation industry.
Click on image to view video, or go to: http://bit.ly/Dual_FOC_Motor_Control
Have a closer look to our motor control demo showing the capabilities of the XMC4400 device. The XMC4400 is a member of Infineon´s Cortex M4 based microcontrollers. We are showing a setup called "Controller based Motion". A PLC controls several motion axis and the Drive executes the motion commands. This is commonly used in automation industry.
Click on image to view video, or go to: http://bit.ly/Dual_FOC_Motor_Control
0 Replies