TlE9833 Download failure - mini wiggler

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Hi,

I have programmed the TLE9833 device with the mini wiggler via Keil. I have done it 3 times. After the third time the microcontroller’s current dropped and it became unresponsive.
The DAP mini wiggler does not seem to detect the device anymore. The current dropped when this happened from about 25mA to below 0mA.
This has happened on two different TLE9833 boards that I have. One of these boards is the Infineon eval board(TLE9832).
Any idea on what happened here?
Do you think it’s possible to put the TLE9833 device into a mode, through incorrect code, where it becomes unresponsive for the DAP mini wiggler?

Reported error from uVision
DAS Server 'UDAS' has been started successfully.
Warning: Unknown JTAG ID=00000000. Assuming an XC866-4FR device with 16K flash
Error: Flash Download failed - Target DLL has been cancelled

Also:
VDDC, VDDEXT and VDDP all read 0V. There 12V input on VS and Vsense

Any idea's on how to get these devices operational again would be appreciated..

Thanks
Donal
0 Likes
0 Replies