Are there special requirements for the assembly of Infineon wafer level TVS diodes?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Hello,

are there any special requirements for the assembly of your TVS diodes in wafer level package technology? where can I find assembly info?

thanks

D.
0 Likes
1 Reply
E_B_
Employee
Employee
10 replies posted 5 replies posted 10 questions asked
Dear Daniele,

basically you can handle them as you do with standard passive components like resistors or capacitors since they are from the same size in X and Y dimensions. The main difference between passives and our devices is the style of the terminations. Infineon Wafer Level Leadless (WLL) diodes (0201 as well as 01005) are looking LGA- like with solder pads only at the bottom of the device.

This needs to be considered for footprint and stencil design (please take look on the recommendations at http://www.infineon.com/cms/en/product/package.html?package=/packages/SMD_-_Surface_Mounted_Devices/...).

If your material, assembly machines and assembly processes are “01005” capable you will very likely be able to assemble Infineon WLL TVS diodes without issues.

Best regards,

E.B.
0 Likes