+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Memtool to read-write a XC161CJ microcontroller's flash?

  1. #11
    Jackson
    Guest
    Hi bmwcoder,

    You also need to connect the /TRST pin.

    Anyway, please ensure that flash read protection is not enabled.
    If read protection is enabled, external access will be disabled.
    Last edited by Jackson; Apr 22nd, 2015 at 07:36 PM.

  2. #12
    bmwcoder
    Guest
    I have connected to TRST pin but still get an error "DAS errors DEVICE_ACCESS"

  3. #13
    Beginner Beginner Askoldkuznetsov is on a distinguished road Askoldkuznetsov's Avatar
    Join Date
    Feb 2020
    Location
    🇺🇦
    Posts
    2
    Points
    115
    Also need to connect
    “ Target presence detection. Connected to GND on target side. Pull-up and sensing on tool side”

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.