Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution


infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: Issue of CAN Bus-off in TC277TE Tricore Controller

  1. #1
    dharmik
    Guest

    Issue of CAN Bus-off in TC277TE Tricore Controller

    Hello Developers,

    I am trying to test CAN bus-off in TC277. For CAN bus-off to happen any of the error counters TEC or REC should reach to 256 value. For testing I am transmitting Random frames while shorting Tx and Rx. That should Increment TEC counter.
    Problem is that TEC is incremented till 0x80 means 128 decimal. After that I found no change in it even though transmitting frames are still going. In this case I am unable to have CAN bus-off.

    What might not possibly increment TEC counter after 128 is my question ?

    Regards,
    Dharmik

  2. #2

    Infineon Employee
    Infineon Employee
    Neal Manson is on a distinguished road
    Join Date
    May 2014
    Location
    Livonia, MI
    Posts
    37
    Points
    81.875
    If you've shorted Tx and Rx together, then there won't be an ACK, and the TEC will not increment past the passive error limit of 128, per this part of the CAN spec:

    Quote Originally Posted by Bosch CAN spec
    3. When a TRANSMITTER sends an ERROR FLAG the TRANSMIT ERROR COUNT is increased by 8.
    Exception 1:
    If the TRANSMITTER is ’error passive’ and detects an ACKNOWLEDGMENT ERROR because of not detecting a ’dominant’ ACK and does not detect a ’dominant’ bit while sending its PASSIVE ERROR FLAG.
    Exception 2:
    If the TRANSMITTER sends an ERROR FLAG because a STUFF ERROR occurred during ARBITRATION whereby the STUFFBIT is located before the RTR bit, and should have been ’recessive’, and has been sent as ’recessive’ but monitored as ’dominant’.
    In exceptions 1 and 2 the TRANSMIT ERROR COUNT is not changed.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.