Attachments are accessible only for community members.
Not applicable
Dec 10, 2014
01:43 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 10, 2014
01:43 AM
Welcome to XMC Hands On Training on
How to configured XMC1200 Bootkit to communicate with PC
Overview
The simplest way to transmit data from a device to PC is via UART protocol.
In XMC1000 Bootkit, virtual COM Port is provided on the On-Board debugger.
Hence, the PC is able to communicate with the device via the USB connection.
The attached zipped file contain the powerpoint slide and example project to guide you on how to do this:
How to configured XMC1200 Bootkit to communicate with PC
Overview
The simplest way to transmit data from a device to PC is via UART protocol.
In XMC1000 Bootkit, virtual COM Port is provided on the On-Board debugger.
Hence, the PC is able to communicate with the device via the USB connection.
The attached zipped file contain the powerpoint slide and example project to guide you on how to do this:
Labels
- Tags:
- IFX
0 Replies