Problem with J-Link

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Not applicable
Hi i am working on XMC1200 for this board J-Link works well,I have another Board recently i got XMC1100 when i trying to debug the following error is coming,As part of Project i supposed to use the XMC1100 .Please suggest me what is fault here and what i suppose to replace,I tried many times by plug and un-plug the J-Link with controller,But same error is coming.Please find the attachment of error. Please suggest me.



Thanks&Regards

Prathibha
0 Likes
4 Replies
Not applicable
Hi,

Can you show your debug configuration?
From the error you have post, I see that the debugger trying to connect via TCP/IP.
Suppose the debugger will connect via USB instead of TCP/IP.
0 Likes
lock attach
Attachments are accessible only for community members.
Not applicable
Thank you Jackson , these are the configurations for J link for xmc1100 ARDUINO,kindly find the attachment please let me know how to solve.




Thanks&Regards
Prathibha
0 Likes
Not applicable
Hi Prathibha,

From the J-Link Commander, it looks like the debugger could not find the device.
It could probably means the device on the board is faulty.
0 Likes
Not applicable
thank you Jackson


Thanks&Regards
Prathibha
0 Likes