Not applicable
Jul 20, 2014
03:36 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 20, 2014
03:36 PM
All examples that I have queried are for the Hexagon board, and are not operational on the Relax board. The Webserver Application for the Relax is operational, but when attempting to utilize only UDP and RTOS, I am unable to even ping the unit.
Please provide a fully operational example of UDP using this hardware. Very little documentation exists to understand if there is a subtle configuration issue that is causing the problem.
Please provide a fully operational example of UDP using this hardware. Very little documentation exists to understand if there is a subtle configuration issue that is causing the problem.
4 Replies
Not applicable
Jul 20, 2014
10:56 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 20, 2014
10:56 PM
Hi,
In order to run the example project on the RelaxKit. You just need to change the ethernet communication pins used in the RelaxKit. Pls refer to example project "Webserver_XMC4500_RelaxKit" for the "Pin Assignment".
Best regards,
Sophia
In order to run the example project on the RelaxKit. You just need to change the ethernet communication pins used in the RelaxKit. Pls refer to example project "Webserver_XMC4500_RelaxKit" for the "Pin Assignment".
Best regards,
Sophia
Attachments are accessible only for community members.
Not applicable
Jul 21, 2014
07:13 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 21, 2014
07:13 AM
Not applicable
Jul 21, 2014
07:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 21, 2014
07:38 AM
Found my mistake. Two pins were different that what I thought I had set. Able to ping.
Not applicable
May 31, 2016
05:21 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 31, 2016
05:21 AM
Dear csmith and sophia ,
I could not run the ETH003_Example1.zip on XMC4500 F100x1024.
I am using DAVE4.
I have inserted ETH_LWIP_0 app to the project and have modified Pin Assignment according to sophia's suggestion.
I think I am missing a basic step because I am getting this error:
../Startup/startup_XMC4500.s:48:21: fatal error: uc_id.inc: No such file or directory
my project doesn't have uc_id.inc and system_XMC4500.h files.
I am beginner to this application.
I want to establish UDP communication. I need support.
thanks in advance.
I could not run the ETH003_Example1.zip on XMC4500 F100x1024.
I am using DAVE4.
I have inserted ETH_LWIP_0 app to the project and have modified Pin Assignment according to sophia's suggestion.
I think I am missing a basic step because I am getting this error:
../Startup/startup_XMC4500.s:48:21: fatal error: uc_id.inc: No such file or directory
my project doesn't have uc_id.inc and system_XMC4500.h files.
I am beginner to this application.
I want to establish UDP communication. I need support.
thanks in advance.