Not applicable
Jul 03, 2014
01:29 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 03, 2014
01:29 AM
Hello,
Normally the resolution of the TLE5012B (E1000) in incremental mode is 12bit (MOD_4 register) but for me the signals A/B are in 14bit:
Normally the resolution of the TLE5012B (E1000) in incremental mode is 12bit (MOD_4 register) but for me the signals A/B are in 14bit:
- Tags:
- IFX
2 Replies
Jul 08, 2014
04:04 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 08, 2014
04:04 AM
Hi pvan,
There is an application note Position Feedback for Motor Control.
Please see attrached picture with yellow marked text.
There is an application note Position Feedback for Motor Control.
Please see attrached picture with yellow marked text.
Not applicable
Jul 08, 2014
05:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 08, 2014
05:20 AM
Hi forix,
Thanks for your help.
I saw this application but it's very strange. In the last User's Manual there is the picture below :
See the counter : 16383 = 0x3fff -> 14bit resolution therefore the Phases A/B are in 16bit resolution !
Thanks for your help.
I saw this application but it's very strange. In the last User's Manual there is the picture below :
See the counter : 16383 = 0x3fff -> 14bit resolution therefore the Phases A/B are in 16bit resolution !