Not applicable
Apr 27, 2014
03:26 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 27, 2014
03:26 AM
Hi,
I am a student in electrical engineering an want to use the relax kit for my bachelor thesis. For this project a RTOS is necessary and I have some experience with µC/OS-III so I decided using this. I found a project file on micrium for the XCM4500 Hexagon Kit. I already compared the chips of these two kits and found out that the pinning is not matching. Is there still a way of porting the RTOS to dave3 just by changing some pin settings? Or does anybody already have some experience using µC/OS-III with the XMC4500 Relax Kit? And would it be possible to mix the RTOS code with some Dave apps? I hope this isn't the wrong forum asking this question.
Thanks in advance!
I am a student in electrical engineering an want to use the relax kit for my bachelor thesis. For this project a RTOS is necessary and I have some experience with µC/OS-III so I decided using this. I found a project file on micrium for the XCM4500 Hexagon Kit. I already compared the chips of these two kits and found out that the pinning is not matching. Is there still a way of porting the RTOS to dave3 just by changing some pin settings? Or does anybody already have some experience using µC/OS-III with the XMC4500 Relax Kit? And would it be possible to mix the RTOS code with some Dave apps? I hope this isn't the wrong forum asking this question.
Thanks in advance!
1 Reply
May 02, 2014
12:27 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 02, 2014
12:27 AM
Hi,
Why don't you use the RTX RTOS provided by DAVE3?
http://www.keil.com/demo/eval/rtx.htm
Best Regards
Travis
Why don't you use the RTX RTOS provided by DAVE3?
http://www.keil.com/demo/eval/rtx.htm
Best Regards
Travis