conneting UART001 Transmit to an output p in

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
The latest version of UART001 app implies that you can connect the UART001 Tx pin to a GPIO pin in order to configure the output characteristics.
How do you do this?
0 Likes
3 Replies
Not applicable
Hi Doug,

In the latest UART001 [1.0.22], the “Pin Configuration” option has been removed from UI. Hence, user is unable to configure input/output characteristic for Rx/Tx pin.
The main purpose is to avoid wrong configuration since most of the common use cases have been taken care by DAVE.

Best regards,
Sophia
0 Likes
Not applicable
Sophia,

Thank you for the clarification.
Is there any future intent to document what common use cases DAVE covers.
This will help clarify what DAVE does, but more importantly what DAVE doesn't do.
For example, many of the peripherals supported in DAVE can be configured for various use cases, but DAVE only supports a few of those configurations.
It would be helpful to know if the missing configurations are not considered common or will be added in a future release.
This will help users determine when they should write drivers on top of DAVE, write their own drivers, or ask for clarification on DAVE functionality.

Regards,
Doug
0 Likes
Not applicable
Hi Doug,

Thank you very much for the feedback. I'll help to forward this to the responsible person.

Best regards,
Sophia
0 Likes