Not applicable
Mar 10, 2014
08:26 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 10, 2014
08:26 PM
We have found a hobbyist who has ported the Arduino™ Wiring language to the XMC microcontrollers. The project was started with the Infineon XMC1100 Boot Kit with a 32MHz Cortex M0.
He has created very helpful Getting Started and Examples, check them out here:
https://code.google.com/p/arduino-to-xmc/
Getting Started
First Steps to get Arduino code running on XMC1100
Examples
The following examples source codes can be downloaded from code trunk.
We welcome all to share your projects and examples here in this forum as well 🙂
He has created very helpful Getting Started and Examples, check them out here:
https://code.google.com/p/arduino-to-xmc/
Getting Started
- The board: Infineon XMC1100 Boot Kit
- Board pin connections: Making physical connections to the XMC1100 Arduino™ board
- Environment: DAVE™ – Free Development Platform for Code Generation (DAVE™ 3.1.10 - it's free!)
- DAVE Forum: ...
- Libraries: Source or directly via SVN trunk
- Releases: tags or directly via SVN trunk
- Examples: via SVN examples.
First Steps to get Arduino code running on XMC1100
Examples
The following examples source codes can be downloaded from code trunk.
- Blink
- Pushbutton
- HelloWord
- Blink Without Delay
- Debounce
- Fade
- Joystick Shield
- Smoothing: smooth multiple readings of an analog input.
- Array
- ForLoop
- Unipolar Stepper Motor
- Real Time Clock (embedded into XMC1100)
- RTC (example code illustrating Time library date strings)
We welcome all to share your projects and examples here in this forum as well 🙂
Labels
- Labels:
-
Technical Center
0 Replies