Not applicable
Feb 17, 2014
04:31 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 17, 2014
04:31 AM
Hello !
I want to run a code on the XMC 4500 allowing it to create a .txt file in which I want to save a table (or a 2*table) !
I would like to save the file on the internal memory if possible, if not how can I save it on a SD-card !?
Please !
Thank you ^^
----------
Anis M'.
Embedded Systems Student
Tunis
I want to run a code on the XMC 4500 allowing it to create a .txt file in which I want to save a table (or a 2*table) !
I would like to save the file on the internal memory if possible, if not how can I save it on a SD-card !?
Please !
Thank you ^^
----------
Anis M'.
Embedded Systems Student
Tunis
2 Replies
Not applicable
Feb 18, 2014
02:36 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 18, 2014
02:36 AM
Hi Anis,
Basically, you need to use the file system command to create the file.
In DAVE3 IDE, we have provide the library for FAT file system.
So you can create the txt file by writing the command.
Please refers to the File System example (SLTHA001_Example1) for details implementation.
Basically, you need to use the file system command to create the file.
In DAVE3 IDE, we have provide the library for FAT file system.
So you can create the txt file by writing the command.
Please refers to the File System example (SLTHA001_Example1) for details implementation.
Not applicable
Feb 25, 2014
08:13 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 25, 2014
08:13 AM
Hi,
I save a table on SD-Card using the USBBL001_USBMS001_Example1. I posted here some details about the configuration for SD-Card instead of USB-device.
http://www.infineonforums.com/threads/1587-SD-card-example-for-XMC-4500-Relax-kit
I hope it helps.
Regards,
MTR
EDIT: I forgot, to explain, how to write in two lines: The problem is described (and solved in my case) here:
http://www.infineonforums.com/threads/1019-USBBL001-Problem-writing-in-two-lines
I save a table on SD-Card using the USBBL001_USBMS001_Example1. I posted here some details about the configuration for SD-Card instead of USB-device.
http://www.infineonforums.com/threads/1587-SD-card-example-for-XMC-4500-Relax-kit
I hope it helps.
Regards,
MTR
EDIT: I forgot, to explain, how to write in two lines: The problem is described (and solved in my case) here:
http://www.infineonforums.com/threads/1019-USBBL001-Problem-writing-in-two-lines