Not applicable
Feb 12, 2014
02:15 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 12, 2014
02:15 AM
Morning,
I'm trying to use the webserver of the XMC to display a page filled with an array of data on the browser.
First of all, I have a XMC4500 relax
I've been trying the exemple project Webserver_XMC4500 and WEBSERVER001_Example2 .
Basicly, I want to write data on the flash memory of the xmc and display it on the browser via the ethernet connection.
When I build and run the exemple on the card I have this :
Ping on the windows cmd is running perfectly BUT the browser doesn't display using relax/index.htm or 192.168.0.10
I'm connecting directly the card to the PC with an Ethernet cable
I'm using Windows 8 64bits
I don't want the data to be on a SD Card, because the project needs a counstant updating of the data (Well if there is a solution to use the SD card and make it writable I'll take it 😛 )
Please can any one help me to
1) Declare a Table of Data that is constantly written into the htm page (or xml if we can display it also)
2) Make the connection happen !
Please ! Thank you
********
Anis M'rad
Embedded Systems Student
Tunis
anis.mrad90@gmail.com
I'm trying to use the webserver of the XMC to display a page filled with an array of data on the browser.
First of all, I have a XMC4500 relax
I've been trying the exemple project Webserver_XMC4500 and WEBSERVER001_Example2 .
Basicly, I want to write data on the flash memory of the xmc and display it on the browser via the ethernet connection.
When I build and run the exemple on the card I have this :
Ping on the windows cmd is running perfectly BUT the browser doesn't display using relax/index.htm or 192.168.0.10
I'm connecting directly the card to the PC with an Ethernet cable
I'm using Windows 8 64bits
I don't want the data to be on a SD Card, because the project needs a counstant updating of the data (Well if there is a solution to use the SD card and make it writable I'll take it 😛 )
Please can any one help me to
1) Declare a Table of Data that is constantly written into the htm page (or xml if we can display it also)
2) Make the connection happen !
Please ! Thank you
********
Anis M'rad
Embedded Systems Student
Tunis
anis.mrad90@gmail.com
1 Reply
Feb 14, 2014
02:46 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 14, 2014
02:46 AM
Xibilius wrote:
Morning,
I'm trying to use the webserver of the XMC to display a page filled with an array of data on the browser.
First of all, I have a XMC4500 relax
I've been trying the exemple project Webserver_XMC4500 and WEBSERVER001_Example2 .
Basicly, I want to write data on the flash memory of the xmc and display it on the browser via the ethernet connection.
When I build and run the exemple on the card I have this :
Ping on the windows cmd is running perfectly BUT the browser doesn't display using relax/index.htm or 192.168.0.10
I'm connecting directly the card to the PC with an Ethernet cable
I'm using Windows 8 64bits
I don't want the data to be on a SD Card, because the project needs a counstant updating of the data (Well if there is a solution to use the SD card and make it writable I'll take it 😛 )
Please can any one help me to
1) Declare a Table of Data that is constantly written into the htm page (or xml if we can display it also)
2) Make the connection happen !
Please ! Thank you
********
Anis M'rad
Embedded Systems Student
Tunis
anis.mrad90@gmail.com
1. You need a cross cable for connection between the PC and the XMC board.
2. Please configure your client PC with a static IP address.
And hopefully in the next few days I can have the spare time to up load a step by step Webserver into the technical center.