Not applicable
Feb 12, 2014
01:56 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 12, 2014
01:56 AM
I have a XMC4500 hexagon kit which works fine. I also have an other application with XMC4502-microcontroller.
Can I use the hexagon kit to program (SWD) the other controller as well or do I need an additional programming tool?
If this is possible, how do I do it? Do it need to somehow disable the hexagon kit XMC4500 for it to not interfere with programming the other mcu?
Thanks
Can I use the hexagon kit to program (SWD) the other controller as well or do I need an additional programming tool?
If this is possible, how do I do it? Do it need to somehow disable the hexagon kit XMC4500 for it to not interfere with programming the other mcu?
Thanks
2 Replies
Not applicable
Feb 12, 2014
03:31 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 12, 2014
03:31 AM
Is there a toolset to program via SWD from DAVE3?
Not applicable
Feb 14, 2014
01:12 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 14, 2014
01:12 AM
Hi Anaconda,
Do you mean you want to program a XMC4502 application code into XMC4500 device on the hexagon board?
If yes, you may do that as XMC4500 is the superset of XMC4502 and both sharing the same download pin and register.
Do you mean you want to program a XMC4502 application code into XMC4500 device on the hexagon board?
If yes, you may do that as XMC4500 is the superset of XMC4502 and both sharing the same download pin and register.