Not applicable
Feb 04, 2014
02:06 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 04, 2014
02:06 PM
Hi,
setting up a H-Bridge by using BTS7960B Drivers.
If you have a look at the Data sheet 6.1 Application Example.
Do i shorten the Load in case of enabling both INH pins?
many thanks
Jakob
setting up a H-Bridge by using BTS7960B Drivers.
If you have a look at the Data sheet 6.1 Application Example.
Do i shorten the Load in case of enabling both INH pins?
many thanks
Jakob
- Tags:
- IFX
1 Reply
Feb 13, 2014
06:21 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 13, 2014
06:21 AM
Dear Jakob,
Thank you for your question and please excuse our late reply.
Do you have the info that the BTS7960B is discontinued?
Here you find alternatives:
http://www.infineon.com/cms/de/product/automotive-ics/motor-drivers-automotive/integrated-high-curre...
You can select your options.
Please tell me if the BTS7960B is still an option for you.
regards
Lars
Thank you for your question and please excuse our late reply.
Do you have the info that the BTS7960B is discontinued?
Here you find alternatives:
http://www.infineon.com/cms/de/product/automotive-ics/motor-drivers-automotive/integrated-high-curre...
You can select your options.
Please tell me if the BTS7960B is still an option for you.
regards
Lars