Aug 06, 2021
02:59 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 06, 2021
02:59 AM
Dear Community,
Hi, to all
I want to test desat pin function without any kind circuit?
Is there any approach for test only fault section without connecting igbt/mosfet to it?
Hi, to all
I want to test desat pin function without any kind circuit?
Is there any approach for test only fault section without connecting igbt/mosfet to it?
Solved! Go to Solution.
1 Solution
Aug 17, 2021
12:50 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 17, 2021
12:50 AM
Hi,
The desat pin of 1ed family can be tested as follows,
" For this testing the desat pin external circuit (cap, resistor and diode) is still required. If you give an ON signal to the driver and reverse bias that DESAT diode, the constant current source will will eventually charge up the desat capacitor and trigger DESAT protection. This step is similar to the case that when a short circuit is happening and the Vce(sat) is too high and not able to clamp (bring down) the desat pin voltage."
Regards,
Abhilash P
The desat pin of 1ed family can be tested as follows,
" For this testing the desat pin external circuit (cap, resistor and diode) is still required. If you give an ON signal to the driver and reverse bias that DESAT diode, the constant current source will will eventually charge up the desat capacitor and trigger DESAT protection. This step is similar to the case that when a short circuit is happening and the Vce(sat) is too high and not able to clamp (bring down) the desat pin voltage."
Regards,
Abhilash P
3 Replies
Aug 17, 2021
12:50 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 17, 2021
12:50 AM
Hi,
The desat pin of 1ed family can be tested as follows,
" For this testing the desat pin external circuit (cap, resistor and diode) is still required. If you give an ON signal to the driver and reverse bias that DESAT diode, the constant current source will will eventually charge up the desat capacitor and trigger DESAT protection. This step is similar to the case that when a short circuit is happening and the Vce(sat) is too high and not able to clamp (bring down) the desat pin voltage."
Regards,
Abhilash P
The desat pin of 1ed family can be tested as follows,
" For this testing the desat pin external circuit (cap, resistor and diode) is still required. If you give an ON signal to the driver and reverse bias that DESAT diode, the constant current source will will eventually charge up the desat capacitor and trigger DESAT protection. This step is similar to the case that when a short circuit is happening and the Vce(sat) is too high and not able to clamp (bring down) the desat pin voltage."
Regards,
Abhilash P
Aug 17, 2021
01:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 17, 2021
01:03 AM
hey,
Thanks, Abhilash P for the reply. I have another doubt about which type of cap we have to use electrolyte, ceramic, or titanium.
Thanks, Abhilash P for the reply. I have another doubt about which type of cap we have to use electrolyte, ceramic, or titanium.
Aug 23, 2021
12:59 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 23, 2021
12:59 AM
Hi,
It can only be a ceramic capacitor. This is because the range of capacitance for this is in several hundreds pF.
Regards,
Abhilash P
It can only be a ceramic capacitor. This is because the range of capacitance for this is in several hundreds pF.
Regards,
Abhilash P